Reach worldwide 1,600,000 Business Owners & Decision Makers every month! TradeHolding.com B2B is The Biggest Business to Business Network used everyday by thousands of buyers and sellers from all over the world.
SIMPLE TO APPLY
Applying the Ashford Formula does not require a lot of time, orΒ involve complicated procedures. If applying to existing concrete, the floor needs to be prepared so thatΒ it is clean, bare concrete. This means that curing agents, dirt, paints, coatings, bondbreakers, oil spills and other contaminants areΒ stripped and/or removed completely. . For optimum performance, the Ashford Formula must be able to penetrate the surfaceΒ so it can react with the concrete. Β Only one application of the Ashford Formula is needed to permanently densify the concrete surface. . APPLICATION
The normal application procedure (whether new or existing concrete) Β is to spray the Ashford Formula on the surface of the slab with a low-pressure, high volume sprayer. Airless sprayers are not recommended. . The material should be applied at approximately 200 square feet per gallon to achieve a flood coat on the floor surface. This means that when someone steps on the applied material, the footprint of their shoe should disappear within 3 or 4 seconds. . Once a flood coat has been achieved, the material should be agitated with fine-bristled brooms to help it penetrate the surface of the concrete. . The material should dwell on the surface for a minimum of 30 minutes without becoming gel-like or slippery. Β In hot conditions, it may become slippery prematurely. If this occurs, it is necessary to fog or mist the floor with water to keep the Ashford Formula in a liquid state for the entire 30-minute period. . When the Ashford Formula turns slippery after the 30 minutes has elapsed, it can be removed by means of a thorough water flush. . While the water is on the slab, the surface should be broomed to loosen all excess Ashford Formula from the surface of the concrete. Squeegee dry. Allow to dry for 2 to 3 hours. . The final flush, broom, and squeegee steps can also be accomplished with an automatic scrubbing machine. These machines can dispense the needed water, broom, vacuum, and squeegee.
All Trade Leads / Offers / Products / Company Profiles / Images and other user-posted contents are posted by the user and American Companies & Leads and TradeHolding.com B2B Network shall not be held liable for any such content. However, TradeHolding.com B2B Network respects the intellectual property, copyright, trademark, trade secret or any other personal or proprietary third party rights and expects the same from others. For concerns, please contact us.